Programming the Handset

Area Code

1.Make sure the cordless handset is OFF (not in talk mode).

2.Press the prog/mute button to go to the main menu.

3.Press CID/vol orbuttons to scroll to HANDSET SETUP.

4.Press prog/mute button to confirm.

5.Press the CID/vol orbuttons to scroll to the AREA CODE menu.

6.Press prog/mute button to enter the menu. SET AREA CODE - - - shows in the display.

7.Use the touch-tone pad to enter your 3-digit area code.

8.Press the prog/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display.

NOTE: To restore the default setting to - - -, press and release the delete button when “SET AREA CODE” shows in the display.

De-Registration

De-registration cancels registration. During the de-registration process, keep the handset near the base.

1.Make sure the cordless handset is OFF (not in talk mode).

2.Press the prog/mute button to go to the main menu.

3.Press CID/vol orbuttons to scroll to HANDSET SETUP.

4.Press prog/mute button to confirm.

5.Press the CID/vol orbuttons to scroll to the DEREGISTRATION menu.

6.Press prog/mute button to enter the menu. REGISTRATION 1YES 2NO shows in the display.

7.Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol orbuttons to scroll to your selection. 2NO is the default setting.

WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

8.Press the prog/mute button to confirm your selection. If you choose to 1YES to de-register, MOVE NEAR TO BASE shows in the display for two seconds, then CONFIRM? 1YES 2NO appears in the display.

9.Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol orbuttons to scroll to your selection. 1YES is the default setting.

16

Page 16
Image 16
GE 23200, 00004007 manual Area Code, De-Registration