6
Initial SetupBattery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.
tab.and.lift.the.cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.
the.battery.case,.then.insert.2.AAA.Alkaline.
batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.
are.depressed.more.than.30.seconds..This.will.
save.your.batteries.should.your.remote.get.stuck.in.
a.place.where.the.buttons.remain.depressed.(e.g.,.
or.for.instance,.between.the.sofa.cushions).
Code Saver
Codes.are.stored.in.permanent.memory.while.you.
are.changing.batteries.so.that.you.will.not.lose.any.
codes.stored.in.the.remote.while.you.are.changing.
batteries..
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..
You.can.either.setup.the.remote.using.the.code.
for.your.brand.of.product,.from.the.code.tables.(on.
separate.sheet),.or.you.can.search.through.the.
library.of.codes.until.you.nd.a.code.that.works.for.
your.product.
Please.refer.to.“Code.Search”.on.page.8.for.more.
information.on.using.the.code.search.feature.to.
learn.how.to.search.through.the.library.of.codes.for.
your.products.