Problem | Solution | |
Cannot hear phone | • | Press VOLUME up button on the handset. |
|
|
|
You experience | • | Charge battery. |
noise, or fading in | • | Is handset out of range? Move closer to the base. |
and out | • | Does the base need to be relocated? |
| • | Make sure base is not plugged into an outlet with another |
|
| household appliance. |
|
|
|
Unit beeps | • | You may be receiving an |
|
| the base. |
| • Place handset in base for 10 seconds to reset the | |
|
| phone. The IN USE indicator blinks and then goes out after |
|
| the unit resets. |
| • | Put handset in base for 12 hours to recharge battery. |
| • | Clean charging contacts on handset and base with a soft |
|
| cloth or an eraser. |
| • See solutions for “No dial tone.” | |
| • | Replace battery. |
|
|
|
Cannot hear the | • | Set the RINGER to ON. |
PAGE/FIND tone |
|
|
|
|
|
Battery will not hold a | • | Make sure the battery is properly charged (12 hours). |
charge | • | Make sure battery contacts on both the handset and the base |
|
| are making contact and are clean; free of dirt or lint. |
| • | When the handset is placed in the base, make sure that the |
|
| base CHARGE/PAGE indicator is on. |
|
|
|
Memory Dialing does not | • | Memory location must be 2 digits (i.e, 01,02, etc.). |
work | • | Did you program the memory location keys correctly? |
| • | Did you follow proper dialing sequence? |
| • | Make sure TONE/PULSE switch is correctly set. |
|
|
|
18
