GE 27957 manual Inserting a Pause in the Dialing Sequence, Dialing a Stored Number

Inserting a Pause in the Dialing Sequence

Press the #PAUSE button (base) or the PAUSE# (cordless handset) on the touch-tone pad to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each pause counts as 1 digit in the dialing sequence.

Reviewing,ChangingorDeletingStoredNames/Numbers

To Review: Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset) button, then press the REVIEW or NEXT button (base) or the CID/VOL (or) button (cordless handset) to scroll through the stored numbers. Or press the memory location number.

To Change: Follow the steps under Storing a Name and Number in Memory except replace the stored name or number with the new information.

To Delete: Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset) button, then press the desired memory location button (0 through 9 number keys) or use the REVIEW or NEXT button (base) or the CID/VOL (or) button (cordless handset) to scroll to a desired memory.

1.While the entry displays, press DELETE (base) or CHAN/delete (cordless handset) button to mark the entry for deletion.The display shows

DELETE?

2.Press DELETE again to delete the entry. **DELETED** is displayed.

Dialing a Stored Number

Handset:

Make sure the phone is ON by pressing theTALK/call back button on the cordless handset.

1.Press the MEMORY/conference button.

2.Press the desired memory location button (0-9).The stored telephone number dials automatically.

-Or-

27