REPT | Repeat call message. Indicates that a new call |
| from the same number was received more |
| than once. |
UNKNOWN CALLER | The incoming call is from an area not serviced by |
| Caller ID or the information was not sent. |
WAITING HANDSET | Prompt telling you to enter registration mode |
REGISTRATION | of handset. |
Handset Sound Signals
Signal | Meaning |
|
|
A long warbling tone (with ringer on) | Signals an incoming call |
Three short beeps | Page signal |
One short beep (every 7 seconds) | Low battery warning |
|
|
Troubleshooting Guide |
|
Telephone Solutions
No dial tone
•Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet .
Ensure the telephone line cord is connected to the base and the wall jack.
•Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service.
•The cordless handset may be out of range of the base. Move closer to the base.
•Ensure the battery is properly charged (16 hours).
•Ensure the battery pack installed correctly.
42
