34

Call Waiting Caller ID

Provided you subscribe to Caller ID with Call Waiting service from your
phone company, you may see who is calling when you hear the call waiting
tone in the receiver. The CID information appears in the display after you
hear the tone.
Press FLASH/PROGRAM to put the current call on hold and answer the
incoming call. Press FLASH/PROGRAM again when you want to return to
the first call.
IMPORTANT: In order to use all of the features of this unit, you must
subscribe to either the standard Name/Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while you are on the phone,
you must subscribe to Call Waiting Caller ID Service.
Answering System Set Up
This section shows you how to set up your answering system to receive
incoming calls. Before you begin the setup, you must turn on the answering
system.
• Press the ANSWERER ON/OFF button to turn the answering system
on and off. The new messages indicator flashes when you have new
messages.
NOTE: The display shows “ANSWERER OFF ” when the answering system is off.
The default status is on.

Voice Instructions

If you need additional assistance, press the MEMO button on the base and
follow the voice instructions.
Answering System Operation

Recording the Outgoing Announcement

For best results when recording, you should be about nine inches from the
microphone, and eliminate as much background noise as possible.
1. Make sure the answering system is ON.
2. Press and hold the ANNOUNCE button on the base while you record
the announcement.