Connecting the Belt Clip
1.To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset.
2.Snap the ends of the belt clip into place.
Connecting Optional Headset
Each handset can be used with an optional headset for hands free operation.
1.Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected.
2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.
3.Press the TALK button to answer a call or make calls using the headset.
4.To return to normal operation, unplug the headset from the jack.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model
1.Make sure the telephone is OFF (not in TALK mode) before you replace the battery.
2.Remove the battery compartment door.
3.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.
4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.
5.Put the battery compartment door back on.
6.Place handset in the charge cradle to charge. Allow the handset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.
45
