GE 28213 manual Language, Auto Talk, Registration

Language

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the LANGUAGE sub-menu.

2.Press mute/menu OK button to enter the menu. The screen displays 4ENGLISH ESPANOL.

3.Use the caller ID-volume(5 or 6) button to scroll to the desired language. ENGLISH is the default setting.

4.Press the mute/menu OK button to save your selection. You will hear a confirmation tone and the selected language shows in the display.

Auto Talk

When this function is ON, during an external call, you may lift the handset to answer a call immediately without pressing any buttons. To end a call, put the handset back on the base cradle directly.

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the AUTO TALK sub-menu.

2.Press mute/menu OK button to enter the menu. The screen displays > NO YES.

3.Use the caller ID-volume(5 or 6) button to scroll to your selection. NO is the default setting.

4.Press the mute/menu OK button to confirm.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary.

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the REGISTRATION sub-menu.

2.Press the mute/menu OK button to enter the menu. The screen displays YES4NO. The default setting is NO.

3.Use the caller ID-volume(5 or 6) button to scroll to YES or NO.

4.If you select YES, press the mute/menu OK button. The screen displays HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your handset should be held near the base during registration process.)

18