GE 28213 Dialing a CID Number, Storing CID Records in Internal Memory, Eleven digits, Ten digits

Dialing a CID Number

1.Make sure the phone is OFF (not in TALK mode).

2.Use the caller ID-volume(5 or 6) button to display the desired record.

3.Press the TALK/SPEAKER button. The number dials automatically.

NOTE: Depending on (a) how the incoming caller’s phone number is formatted when it is received, and (b) whether or not you previously pre-programmed your local area code into the set up menu, you may need to adjust the format of the incoming caller’s stored phone number before making the call, press the redial/ format button to adjust the number, and try again.

Available formats include:
Number of digits	Explanation	Example
Eleven digits	long distance code “1 ”	1-317-888-8888
	+3-digit area code
	+7-digit telephone number.
Ten digits	-digit area code +	17-888-8888
	7-digit telephone number.
Seven digits	7-digit telephone number.	888-8888

Storing CID Records in Internal Memory

You may also store CID information in the phone’s internal memory.

NOTE: It is important that you format CID records correctly BEFORE storing in internal memory as you cannot reformat CID records stored in memory.

1.Make sure the phone is OFF (not in TALK mode).

2.Use the caller ID-volume(6 or 5) button to scroll to the desired CID record.

3.Press the mute/menu OK button to display ENTER NAME and then follow “ADD RECORDS in Phoneboook section” procedures from Step 3 to Step 7 to store the number.

NOTE: Press the END button once to keep the previous setting (making no changes) and return to the menu.

NOTE: If the selected CID record contains any information that is non-numeric, the unit will not allow this record to transfer to the internal user memory. The handset will display UNABLE TO STORE. 31