GE 28301 manual Caller ID Solutions, Handset displays HANDSET NEEDS REGISTRATION

back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

Handset displays "SEARCHING" or "NOT REGISTERED" and cannot link up with the base when the TALK/CALL BACK button is pressed.

•Handset may be out of range of the base. Move closer to the base.

•Make sure the power adaptor is properly installed.

•Disconnect the handset battery and plug it in again. Place the handset on the cradle for at least 2 to 3 minutes.

•Disconnect the power adaptor and plug it in again. Then place the handset on the cradle for at least 2 to 3 minutes.

Handset displays "HANDSET NEEDS REGISTRATION"

•Follow the programming in the telephone procedures to re-register the handset to the base.

•Press the SELECT button to begin handset registration. Follow instructions on Handset screen.

Registration did not work

•Charge the batteries for 16 hours.

•Uplug and then plug in the power adaptor.

Caller ID Solutions

No Display

•Charge or replace the batteries.

•Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the AC power adaptor from the base and reconnect it.

16