Handset Setup 
NOTE: When a handset is associated with a base, a number is given to the handset by the base. This number is displayed on the handset after the name and must be used for internal calls.
NOTE: A handset can be registered to only one base.
6.Place the handsets in the charge cradles. The blue CHARGE indicator turns on, verifying the batteries are charging.
Allow handset to charge for 16 hours prior to first use. If you do not properly charge the handset, battery performance is compromised.
Handset Registration
For accessory handsets (without Base unit), an
On the base:
1.Put the base into subscription mode, by pressing and holding the PAGE button for at least 8 seconds.
2.The DECT indicator light starts flashing. It is now ready to be associated with a new handset. This registration mode lasts 90 seconds after pressing the button. Once the subscription is done, the base LED flashing is switched off.
On the handset:
1.Make sure your phone is OFF (not in talk mode).
2.Press 
, navigate to the Registration menu, press 
to enter.
3.Use 
or 
to scroll to Register Handset.
