Placing a Call
Handset
1.Pick up the handset and listen for a dial tone.
2.Dial the number you want to call.
3.When finished, hang up the handset.
Speakerphone
1.Press the SPEAKER button on the base and listen for a dial tone.
2.Dial the number you want to call.
3.When finished, press the SPEAKER button to hang up.
Answering a Call
NOTE: Make sure the ringer switch is set to HI or LO, or the phone will not ring. The visual ring indicator will flash at all settings.
Audio Boost
You may press this button to temporarily boost the volume of the handset receiver during a call. To return to normal levels, press the button again. The Volume levels will also return to normal when handset is replaced on the base after a call.
Handset
1.When the phone rings, pick up the handset.
2.When finished, hang up the handset.
14
