GE 29893 Your Local Area Code, Incoming Message Length, Enter button Menu button PLAY/STOP button

YOUR LOCAL AREA CODE

1.If you just adjusted the Time/Date menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until LOCAL AREA CODE is displayed.

2.Use NEXT or PREVIOUS to select the first digit.

3.Once the first digit is set, press ENTER.

4.Repeat steps 2-3 until all the digits of the area code are set.

5.When finished, press ENTER to confirm.The unit beeps.

NOTE: To skip to the next setting, press MENU. To exit setup, press PLAY/STOP.

TIP: You can use the keypad to enter all the digits in one step. To enter 317, press 3,1, and 7. Then press ENTER.

ENTER button

MENU button PLAY/STOP button

N

E

					W
					C
					ALL
MENU					MEMO
	ENT			TING
	ER	MESSAGE		GREE
ERASE	DIAL				VOL +
		ST OP
					ON/OFF
MEM DIAL STORE		MESSAG ES/CALLER ID		VOL -
					FLASH
A	1	ABC 2		DEF 3
QUICK DIAL
					REDIAL/PAUSE
B	GHI 4	JKL 5		MNO6
	RS 7		8	YZ 9	HOLD
C	PQ	TUV		WX
MEM DIAL	*			#
		OPER 0			SPEAKER
	TONE

mic

PREVIOUS button NEXT button

INCOMING MESSAGE LENGTH

This setting allows you to set the maximum length of time allowed for incoming messages. You can choose from 1-4 minutes.

1.If you just adjusted the Local Area Code menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until

MESSAGE LENGTH is displayed.

2.Use NEXT or PREVIOUS or press the keypad number (1-4) for the desired setting.

3.When finished, press ENTER to confirm. The unit beeps.

NOTE: To skip to the next setting, press MENU. To exit setup, press PLAY/STOP.

11