GE 29893 manual Recording the Greeting, Play/Stop

You may need to use this feature if you have:

•Multiple area codes

•Overlapping area codes

•Areas that require 10-digit dialing.

1.If you just adjusted the Dialing menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until REGIONAL AC# is displayed. The first digit of code #1 flashes.

2.Use NEXT or PREVIOUS to set the first digit.

3.Press ENTER. The next digit flashes.

4.Repeat steps 2-3 until all the digits of the regional area code are set.

5.When finished, press ENTER to confirm.The unit beeps.

NOTE: If you donÕt want to enter any more area codes, press MENU. To exit setup, press PLAY/STOP.

NOTE: You can use MENU at any time to scroll through the settings. Also, if you donÕt make a selection within 30 seconds, the unit automatically exits the setup menu.

TIP: You can use the keypad to enter all the digits in one step. To enter 891, press 8,9, and 1. Then press ENTER.

MENU button				PLAY/STOP
				button
					N
					E
					W
					C
					ALL
MENU					MEMO
	ENT				TING
	ER		MESSAGE		GREE
ERASE	DIAL				VOL +
			ST OP
					ON/OFF
MEM DIAL STORE		MESSAG ES/CALLER ID			VOL -
					FLASH
A	1		ABC 2		DEF 3
QUICK DIAL
					REDIAL/PAUSE
B	GHI 4		JKL 5		MNO6
	RS 7			8	HOLD
					YZ 9
C	PQ		TUV		WX
MEM DIAL	*				# SPEAKER
			OPER 0
	TONE
			mic
PREVIOUS button				NEXT button

RECORDING THE GREETING

Before using your new answering system, you should record a greeting (the announcement callers hear when your answering system answers a call). If you don't record a greeting, callers hear a default greeting which says, "We are unable to take your call. Please leave a message. Thank you for calling."

When recording the greeting you should be about 6 inches from the unit. Eliminate as much background noise as possible.

14