Before YOU Begin, Tools YOU will Need | GE 2900, 3900 instruction

Installation Instructions

Zoneline Air Conditioners

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT – Save these

instructions for local inspector’s use.

•IMPORTANT – Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the owner.

•Note to Owner – Keep these instructions for future reference.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

TOOLS YOU WILL NEED

Phillips screwdriver

IMPORTANT ELECTRICAL SAFETY—READ CAREFULLY

CAUTION:

•Follow the National Electrical Code (NEC) or local codes and ordinances.

•For personal safety, this Zoneline must be properly grounded.

•Protective devices (fuses or circuit breakers) acceptable for Zoneline installations are specified on the nameplate of each unit.

•Do not use an extension cord with this unit.

•Aluminum building wiring may present special problems—consult a qualified electrician.

•When the unit is in the OFF position, there is still voltage to the electrical controls.

•Disconnect the power to the unit before servicing by:

1Removing the power cord (if it has one) from the wall receptacle.

OR

2Removing the branch circuit fuses or turning the circuit breakers off at the panel.

ZONELINE COMPONENTS

Zoneline unit

Room cabinet*

Power supply kit**

Exterior grille/louver**

Wall case**

** Shipped with the Zoneline unit

** Check the “Essential Elements” list on the unit

11

Image 11

GE 2900, 3900 installation instructions Before YOU Begin, Tools YOU will Need, Zoneline Components

Contents

Write the model and serial numbers here Model # Serial # Air Conditioners Consumer Support Care and CleaningReplacing an existing unit? Care and Cleaning Troubleshooting Tips Safety InstructionsFan, Mode & Operation Control Quick Heat Recovery Ventilation Control Other features of your ZonelineCare and Cleaning To Remove the Room Cabinet Troubleshooting Tips Consumer Support Air Direction Auxiliary Controls on your Zoneline Constant on Fan Temperature LimitingLoad Shedding Central Desk Control Freeze Sentinel Ge.com Heat Sentinel Central Desk Control External Fan Obtained locally Care and cleaning Instructions Safety Operating InstructionsTroubleshooting Tips Consumer Support Air Filters Zoneline Components Before YOU BeginTools YOU will Need Use the correct wall case Replacing AN Existing UNIT? Direct Connection 230/208 Volt Electrical Connection Options HOW to ConnectPower Cord Connection Power Branch Circuit Power For Subbase InstallationFor Direct Connect Installation Branch Circuit Proper GE Power Make Electrical Connection to the Unit Power Cord Connections Power Connection Chart Prepare the Unit Installing the ZonelineInstall the Wall Case Exterior Grille Replace the Room Cabinet Install the Unit Into the Wall Case External Drain OPTIONAL-DRAIN KIT Installation Or heat as it should Before you call for service…Zoneline does Not start Operation Temperature displayAir is not always Cool or hot during Normal Operating Sounds Things that are normal One Year Zoneline WarrantyCleaning GE Will Replace Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website