Before You Throw Away Your Old Refrigerator or Freezer

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions

■This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

■Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

■Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Turning the temperature control dial to the OFF position stops cooling but does not shut off power to the refrigerator.

Operating Instructions Installation

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous…even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

■Take off the doors.

■Leave the shelves in place so that children may not easily climb inside.

CFC Disposal

Your old refrigerator has a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone.

If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant you can be subject to fines and imprisonment under provisions of environmental legislation.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

Instructions Troubleshooting Tips

Customer Service

2, and 4, 3 specifications

The GE 3 and 4,2 are advanced electric locomotive models produced by General Electric, recognized for their robust performance, efficiency, and technological innovations. These locomotives have become staples in freight transportation, contributing significantly to the evolution of railway systems.

The GE 3 model offers a powerful traction system with a horsepower rating typically ranging from 2,500 to 3,200 HP, which enables it to handle heavy freight loads across various terrains. One of its primary features is the AC propulsion technology, providing smoother acceleration and improved traction compared to traditional DC systems. This technology enhances energy efficiency, reducing operational costs for railway operators.

A notable aspect of the GE 3 is its modular design, allowing for easy upgrades and maintenance. This design philosophy ensures that the locomotive can be adapted to meet changing operational demands without extensive overhauls. Additionally, the GE 3 is equipped with advanced braking systems, including dynamic and regenerative braking, which not only improves safety but also contributes to energy savings by converting kinetic energy back into usable power.

Turning to the GE 4,2, this model continues to build upon the strengths of its predecessors while introducing several new features. It typically has a horsepower range of about 4,200 HP, making it suitable for even heavier freight trains. The GE 4,2 is designed with enhanced aerodynamics, which helps reduce drag and improve fuel efficiency.

This locomotive also showcases cutting-edge technology with its onboard diagnostics system. This system monitors various parameters in real-time, enabling predictive maintenance and reducing downtime. The GE 4,2 is also equipped with the latest traction control technology, which optimizes wheel slip performance, further enhancing its ability to operate efficiently under challenging conditions.

Both the GE 3 and GE 4,2 are designed with operator comfort in mind. They feature ergonomic cab designs with modern instrumentation, reducing fatigue for locomotive engineers during long-haul operations. Safety features are further bolstered by advanced signaling and communication systems, ensuring compliance with contemporary rail safety standards.

In conclusion, the GE 3 and 4,2 locomotives exemplify the intersection of power, efficiency, and cutting-edge technology in freight transportation. Their commitment to performance and sustainability positions them as key players in the future of railway logistics, continually adapting to meet the demands of the industry.

GE 3, and 4, 2 owner manual Before You Throw Away Your Old Refrigerator or Freezer, CFC Disposal

Models: 2 and 4 3