Wireless Monitor

The generator is supplied with a battery-powered, wireless monitor.

The monitor communicates wirelessly with the generator control panel. The monitor may be placed in a suitable location in the home. The system has a line-of-sight range of about 200 feet, but this distance will decrease if the signal has to pass through walls or other objects.

The wireless monitor communicates with the generator, every 10 minutes and will display the status via LED lights on the front of the monitor.

Compare the illustration below with your monitor to familiarize yourself with these important components.

•Generator Ready (A) - Green LED

•Generator Power (B) - Green LED

•Service Needed (C) - Red LED

•System Update (D) - Press for current system update with generator.

•Service code descriptions (E) - Name and number of flashes are listed on the backside of the wireless monitor.

•Battery Access Cover (F) - Record the dealer name and phone number on the label provided. Once opened, two AA batteries are installed in the compartment (G)..

A

 

REPRODUCTION

generator ready

 

 

B

NOT

 

 

 

generator power

# of flashes service needed

 

 

 

1 low battery voltage

5 low frequency

 

 

 

2 low ￿uid level

6 engine overspeed

C

service needed

3 under/over voltage

7 high temperature

 

 

 

4 engine does not start 8 transfer switch

 

for

 

part #: 316196 fcc id: MCQ-XBS2C IC id: 1846A-XBS2C

D

system update

 

 

 

 

 

 

E

G

DEALER NAME

F

DEALER PHONE

36