3.Locate the MENU AND ESCAPE buttons on the control panel (A) . Press and hold for 3 seconds to enter the linking mode.
4.“LINKING MODE” will scroll across the generator
control panel. | A |
|
menu
ok
esc
A
auto off manual
5. Locate and hold the SYSTEM UPDATE button (B) on |
| ||
the wireless monitor for 5 seconds. All 3 LEDs will flash |
| ||
until the monitor links to the generator. Once it links, |
| ||
|
| REPRODUCTION | |
the monitor will display the current state. The monitor |
| ||
will try to link for 1 minute. (This step can only be |
| ||
completed when the generator is in Linking Mode). |
| ||
6. Once the link has been confirmed, press the OK |
| ||
button on the generator control panel to exit or the |
| ||
control board will turn off linking after 5 minutes. The | B | ||
generator will now communicate with the wireless |
| ||
monitor. | NOT |
|
|
NOTICE It may take up to 1 minute for the monitor to begin |
| ||
displaying the generator status correctly. |
|
| |
| for |
|
|
generator ready
generator power
service needed
system update
38