Please Note: Z-Wave home control networks are designed to work properly alongside 802.11 wireless computer networks, Bluetooth and other 2.4GHz or 5.8GHz devices. Some baby cams, wireless video devices and older cordless phones using the 900MHz frequency range may cause interference and limit Z-Wave functionality. Many 900MHz products have a switch to select channel “A” or “B”. You may find that one of these channels will cause less interference than the other.
Key Features:
-One Z-wave controlled AC outlet for standard incandescent lighting
-Remote ON/OFF and Brightness control via the Z-Wave controller
-Manual ON/OFF and Brightness control with the front panel pushbutton
-Load-Sensing turns the light ON if the switch on the connected light is used instead of the remote or pushbutton on the Z-Wave module
-One Always-ON pass-through AC outlet
-Space efficient design
-Does not block the lower outlet when plugged in to the upper outlet of a duplex wall receptacle. (This assumes that the duplex receptacle is mounted with the ground pin down.)
-Plugs and cords for connected devices route to the side allowing close placement of furniture
-Grounded 3-wire power connection for safety
