GE 49-5301-1 manual Problem

PROBLEM

TO REMOVE SPOTS AND FILM

ETCHING

YELLOW OR

BROWN FILM

FORMATION

CHIPPING OF CHINA AND GLASSWARE

WATER STANDS IN SUMP AT BOTTOM OF TUB

POSSIBLE CAUSE AND REMEDY

.

Try a vinegar rinse. Remove all metal utensils and wash load as usual but omit the dry portion of the cycle. With load still in dishwasher, set a bowl containing 2 cups (5oO ml) of white vinegar on bottom rack. Run dish-

washer through a complete cycle.

Caused by using too much detergent in soft water. This milky film- like surface cannot be removed because metal ions have been removed from the surface of the glass. To prevent this problem, use less deter- gent when your water supply is naturally soft or when you use a water softener. Also, wash glass~rare in shortest cycle that will get them clean.

e

Tea or coffee stains in cups can be removed by hand using a solution of 1/2 cup bleach and 3 cups of warm water.

An over-all yellow or brown film on dishes can be caused by iron deposits in water. Glassware becomes yellow or brown but is still transparent. The installation of an iron filter in the water supply line removes the cause of this problem and is the only permanent solution. For more complete information, contact your local water conditioning company.

Yellow film on sterling silver can result when copper utensils are washed in the same load.

Rough handling of dishes ~vill cause chipping. Load tvith care. SL)at ciishes firmly in the racks so they cannot be dislodgt’d, Glasses must lean against the pins, and the rim of the glass should rest on the bottom of the rack. When placing tall glass~vare and stemlvare in the dishwasher, check to make certain that they will clear the top of the tub. Glasses and stemware should always be piaced in the upper rack. NEVER in the lower rack. (See section on loading)

Water remaining in the sump at end of cycle is normal. This water is--~

clean and keeps the pump primed and the water seal moist and active.

11