Operating Instructions Safety Instructions

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.

CONTROL LOCK/UNLOCK

PRESS + AND – AND HOLD FOR 3 SECONDS

Oven Control, Clock and Timer Features and Settings

Troubleshooting Tips Care and Cleaning

BAKE/TEMP RECALL Pad

Touch this pad to select the bake function.

BAKE Light

Flashes while in edit mode—you can change the oven temperature at this point. Glows when the oven is in bake mode.

START/ON Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations. The display will show “PrE” while preheating. When the oven reaches

the selected temperature, the oven control will beep and the display will show the oven temperature.

Function Error Code

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

If the function error code appears during the self-cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go.

KITCHEN TIMER ON/OFF Pad

Touch this pad to select the timer feature. Then press + and – pads to adjust time.

TIMER Light

Flashes while in edit mode—you can change the set time at this point. Glows when the timer has been activated. Flashes again when the time has run out until the control is reset.

CLOCK Pad

To set clock, touch this pad twice and then touch the + and – pads. The time of day will flash in display when oven is first turned on.

START TIME Pad

Use along with the COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

START TIME Time Light

Flashes while in edit mode—you can change the start time set time at this point. Glows when the function has been activated.

COOKING TIME Pad

Touch this pad and then touch the + or – pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

Consumer Support

 

Touch the CLEAR/OFF pad. Allow the oven to cool for

COOKING TIME Light

 

Flashes while in edit mode—you can change

 

one hour. Put the oven back into operation. If the function

 

set time at this point. Glows when function

 

error code repeats, disconnect the power to the range and

 

has been activated. Flashes again when the

 

call for service.

 

time has run out until the control is reset.

 

 

 

 

AUTOMATIC OVEN Light

 

 

This lights anytime the oven has been

10

 

programmed using the COOKING TIME or

 

START TIME functions.