GEAppliances.com

Problem

 

Possible Causes

What To Do

 

 

 

 

 

Clock and timer do

 

Plug on range is not completely

• Make sure electrical plug is plugged into a live, properly

not work

 

inserted in the electrical outlet.

grounded outlet.

 

 

 

 

 

 

 

A fuse in your home

• Replace the fuse or reset the circuit breaker.

 

 

may be blown or the

 

 

 

circuit breaker tripped.

 

 

 

 

 

 

 

 

Oven controls improperly set.

• See the Using the clock and timer section.

 

 

 

 

 

Oven will not self-clean

 

Oven controls improperly set.

• See the Using the self-cleaning oven section.

 

 

 

 

 

 

 

Oven door is not in the

• Make sure you move the door latch handle all the way

 

 

locked position.

to the right.

 

 

 

 

 

“Crackling” or

 

This is the sound of the

• This is normal.

“popping” sound

 

metal heating and cooling

 

 

 

during both the cooking and

 

 

 

cleaning functions.

 

 

 

 

 

 

Excessive smoking

 

Excessive soil.

• Touch the CLEAR/OFF pad. Open the windows to

during a clean cycle

 

 

 

rid the room of smoke. Wait until the light on the

 

 

 

 

SELF CLEAN pad goes off. Wipe up the excess soil

 

 

 

 

and reset the clean cycle.

 

 

 

 

 

Oven door will not

 

Oven too hot.

• Allow the oven to cool below locking temperature.

open after a clean cycle

 

 

 

 

 

 

 

 

 

Oven not clean after a

 

Oven controls not properly set.

• See the Using the self-cleaning oven section.

clean cycle

 

 

 

 

 

Oven was heavily soiled.

• Clean up heavy spillovers before starting the clean

 

 

 

 

 

 

cycle. Heavily soiled ovens may need to self-clean

 

 

 

 

again or for a longer period of time.

 

 

 

“F—and a number

 

You have a function error code. • Touch the CLEAR/OFF pad. Put the oven back into

or letter” flash

 

 

 

operation.

in the display

 

 

 

 

 

If the function code repeats.

• Disconnect all power to the range for at least 30

 

 

seconds and then reconnect power. If the function error code repeats, call for service.

• If a function error code appears during the self- cleaning cycle, check the oven door latch. The latch may have been moved, if only slightly, from the locked position. Make sure the latch is moved to the right as far as it will go. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation.

29

Support Consumer Tips Troubleshooting Cleaning and Care Instructions Operating Instructions Safety