GE 5100 The controls on your Zoneline, Operating Instructions, Mode Control, Temp Control, Call

Operating Instructions

The controls on your Zoneline

MODE COOL FAN HEAT COOLER WARMER TEMP

FAN	HIGH LOW AUTO	CALL	STOP/ON
		SVC

12

1 Mode Control 2 Temp Control

COOL—For cooling

HEAT—For heating

FAN—For fan-only operation

The fan control sets the fan operation for HIGH, LOW or AUTO speed. When set at AUTO, it auto- matically switches between LOW and HIGH as room temperature changes.

The temp control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort.

COOLER—For cooler temperatures WARMER—For warmer temperatures

STOP/ON—Stops heating, cooling and fan opera- tion. Power remains connected to the Zoneline and the Freeze Sentinel still functions.

The CALL SVC (call service) indicator will light if the compressor fails to start. If the control is set at COOL, the compressor stops and the fan operates alone. If set at HEAT, it continues in the HEAT setting. Call for service as soon as possible.

4