Cool -Touch Electric Skillet
IMPORTANT SAFEGUARDS
In order to prevent the risk of fire, electric shock, burns or other injury or damage, follow these instructions carefully. When using electrical appliances, basic safety precautions should always be followed including the following:
A short
USED WITH CARE; HOWEVER, THE MARKED ELECTRICAL RATING SHOULD BE AT LEAST AS GREAT AS THE ELECTRICAL RATING OF THE SKILLET. The extension cord should not be allowed to drape over the counter or tabletop
KEEP WARM SETTING: The Temperature Control Probe has a Keep Warm range setting of approximately 160° to 180° F. The indicator light will cycle ON and OFF when this setting is maintaining the desired temperature. NOTE: During initial use of this appliance, some slight smoke and/or odor may be detected. This is normal with many heating appliances and will not recur after a few uses. Only
1. | READ ALL INSTRUCTIONS |
| BEFORE USING. |
2. | Do not touch hot surfaces. Use |
| Handles/Legs Assembly. |
8.Do not use outdoors.
9.Do not let Cord hang over edge of table or counter, or touch heated surfaces.
where it can be pulled on by children or unintentionally tripped over.
use with Temperature Control Probe number
3. | To protect against electrical shock, |
| do not immerse Temperature |
| Control Probe, Cord or plugs in |
| water or other liquids. |
4. | Close supervision is necessary when |
| any appliance is used by or near |
| children. |
5. | Unplug from outlet when not in use |
10. Do not place on or near a hot gas |
or electric burner, or in a heated |
oven. |
11. Extreme caution must be used |
when moving appliance containing |
hot oil or other hot liquids. |
12. Always attach Temperature Contol |
Probe to appliance first, then plug |
Know Your Electric Skillet
Parts and Features
and before cleaning. Allow to cool |
before putting on or taking off |
parts, and before cleaning the |
appliance. |
6. Do not operate any appliance with a |
damaged Cord or plug or after the |
appliance malfunctions or has been |
damaged in any manner. Call |
Customer Service(see warranty) to |
return for examination, repair, or |
adjustment. |
Cord into the wall outlet. To |
disconnect, turn Temperature |
Control Dial to OFF, then remove |
plug from wall outlet. |
13. Do not use appliance for other than |
intended use. |
14. Be sure Lid Handle is assembled |
and fastened properly. See assembly |
instructions on page 4, “How to |
Assemble Your Electric Skillet”. |
1
2
3
4
5
Lid
Lid Handle
Transparent Glass Window
Steam Vent
Lid Rest latch
1
2
g |
|
Cool- |
|
Touc | |
| h S |
| killet |
3
4
5
7. The use of accessory attachments |
not recommended by manufacturer |
may cause injuries. |
6Probe Guard
7Temperature Control Indicator
6
7
8
SAVE THESE INSTRUCTIONS!
Consumer Safety Information
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
|
| 13 |
| |
8 | Temperature Control Dial | |||
|
| |||
|
|
| 12 | |
9 | Cord | |||
|
| |||
|
|
|
|
10 Temperature Control Probe |
11
10
9
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way.
CAUTION: To reduce the risk of electric shock, do not immerse the Electric Skillet in water with the TEMPERATURE CONTROL PROBE attached. No user serviceable parts inside. Do not attempt to service this product.
11 | Handles / Legs Assembly |
|
|
12 |
|
|
|
13 |
|
|
|
2 | 3 |