GE 840092600 manual How to Operate the Controls, Processing with the S-Blade, Is sharp

840092600 Ev01.qxd 4/9/02 8:36 AM Page 6

How to Operate the Controls

On/Off

Pulse

Speed Dial

The controls are conveniently located on top of the base. Rotate the center knob to select a speed between 1 and 4. If the bowl and cover are properly locked the Ready light should be on.

Processing with the S-Blade

The S-blade can be used

to coarsely chop, finely mince, mix, or puree food

to a smooth consistency.

1.Make sure the Control Switch is turned OFF and the unit is unplugged.

2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 5.)

3.Place the S-blade onto motor shaft of food processor in center of bowl. Turn slowly until blade drops into place. Handle carefully; the blade

is sharp.

4.Lock cover onto bowl. (See “How to Lock the Cover” on page 5.) The food gate should be in the continuous feed chute. Insert food pusher into food chute.

5.Pull all of cord out of cord storage. This will help air flow and keep the motor cool. Plug in unit and process food. The processing speed and time will determine the finished consisten- cy of the food. The Pulse button can help you avoid overprocessing.

S-Blade

Motor Shaft

6