About the controls on the air conditioner
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
The display always shows the room temperature except when setting the Set temperature or the Delay timer.
Light indicates the unit is in the temperature or delay time Set mode.
Fan Fan
Light indicates the delay timer is set.
Air Conditioner Controls
Controls
Power Pad
Turns air conditioner on and off. When turned on, the display will show the room temperature.
Display
Shows the room temperature or time remaining on the Delay timer. Shows the Set temperature while setting the temperature in Cool or Energy Saver modes. The Set light will turn on while setting.
NOTE: The display will change to show the room temperature after settings have been made.
To recall the Set temperature, press the Temp Increase or Decrease pads.
Temp Increase /DecreasePads
Use to set temperature when in Cool or Energy Saver mode. The Set light will turn on while setting.
Delay Timer Increase
Pads
Each touch of the Increase / Decrease pads on the unit or the Increase + / Decrease – pads on the remote control will set the delay time when using the Delay
Fan Speed Pads
Use to set the fan speed to Low, Med, High or Auto on the unit. NOTE: On the remote control, use the fan speed Increase + / Decrease – pads to set the fan speeds to Low, Med or High. Use the Auto pad to turn Auto fan on.
Remote Control
Mode Pad
Use to set the air conditioner to Cool, Energy Saver or Fan Only mode.
Delay Pads
Delay
Delay
24hours. How to set:
Press the Delay
+pad on the remote control. Each touch of the Increase / Decrease pads on the unit or the Increase + / Decrease – pads on the remote control will set the timer in
To review the remaining time on the Delay
To cancel the timer, press the Delay
Power Outage Recovery Feature
| In the case of a power outage or interruption, the | feature was set, it will resume countdown. You may |
4 | unit will automatically | need to set a new time if desired. |
used after the power is restored. If the Delay |
|