Installation Instructions

INSTALL THE CASE IN THE WINDOW

AOpen the window and mark the centerline of the window sill.

BCarefully place the case on the window stool and align the center mark on the bottom front with the centerline of the sill.

CPullrail. the window down behind the top mounting

NOTE: Do not shut the window so tightly that movement of the accordion panels is restricted.

DSelect the position that will place the sill supports near the outermost point on the sill. Place the short side of the sill supports, on the case bottom, toward the window. Attach the sill supports to the case track hole in relation to the selected position using 2 Type B screws in each support.

CAUTION: Do not install this air conditioner in a window if the bolts do not contact the window sill.

INSTALL THE CASE IN THE WINDOW (CONT.)

FSecure the case to the window sill by using 3 Type D screws.

GPull the accordion panels to each window sash track. Attach them on each side to the window sash and the window sill using

4 Type C screws.

Long side of sill supports

OUTSIDE

EAdjust the bolt and the nut in each support so that the case is installed with a slight tilt to the outside. Use a level; no more than 1/2 bubble will be the correct case slant to the outside.

CAUTION: If the sill support bolts do not contact the window sill or if you have a window without a sill you must order accessory kit RAK87 to properly install this air conditioner. Call 800.626.2002 or visit GEAppliances.com.

11

Page 10 Page 12
Page 11
Image 11
GE 880 installation instructions Install the Case in the Window
Page 10 Page 12

880 specifications

The GE 880 is a significant innovation in the domain of aerospace and defense technology, representing a blend of performance, reliability, and advanced engineering. As part of General Electric's renowned lineup of jet engines, the GE 880 showcases several cutting-edge features and characteristics that elevate its operational efficiency and versatility.

One of the standout features of the GE 880 is its high bypass ratio turbofan design. This configuration allows for a greater volume of air to bypass the engine core, which contributes to improved fuel efficiency while minimizing noise levels. This is particularly advantageous for commercial aviation, where regulatory compliance regarding noise pollution has become increasingly strict. The aerodynamic design also facilitates enhanced thrust-to-weight ratio, providing the engine with the ability to deliver optimal performance across various flight conditions.

The GE 880 is equipped with advanced materials and manufacturing techniques that enhance durability and performance. The use of lightweight composite materials reduces overall weight while maintaining structural integrity, allowing for better fuel economy and operational range. Additionally, the engine incorporates turbine blades made from advanced alloys and coated with thermal barrier coatings, enabling them to withstand extreme temperatures and pressures.

Another key characteristic of the GE 880 is its sophisticated electronic engine control system. This system optimizes engine performance by providing real-time monitoring and adjustments across a range of operational parameters. It assists pilots in achieving optimal efficiency during various phases of flight, from takeoff to cruising and landing. Furthermore, the engine is designed to facilitate easy maintenance, with modular components that simplify repairs and reduce downtime.

In terms of emissions, the GE 880 has been engineered to exceed modern environmental standards. The engine design aims to minimize nitrogen oxide (NOx) emissions and comply with stringent regulations, making it an environmentally friendly option for airlines striving to reduce their carbon footprints.

Overall, the GE 880 stands out in the aerospace sector due to its remarkable combination of efficiency, power, and eco-friendliness. Its advanced technologies, robust design, and commitment to sustainability make it a preferred choice for aircraft manufacturers and operators aiming for reliable performance in an increasingly competitive market. As the aviation industry continues to evolve, the GE 880 is poised to play a crucial role in shaping the future of air travel.
Top Page Image Contents