
Registration

Register

Up to 4 cordless handsets can be registered to the same base.
1. Press the menu/ok button.
. Press the 5 or 6 button to select REGISTRATION and press the menu/ok button.
3. Press the 5 or 6 button to select REGISTER and press the menu/ok button, the
screen displays ENTER PIN (default setting = 0000).
4. Input the correct PIN code and press the menu/ok button to begin registration.
The screen displays SEARCHING. Press and hold the mute/register button on the
base until the base screen displays REGISTRATION.
NOTE: While in SEARCHING mode, the handset is inoperable, wait
for mode to time out before use.
NOTE: If an incorrect PIN code is entered, registration will not
succeed. Handset screen displays WRONG PIN, after time out.
NOTE: If base is unable to register, NO BASE displays on the screen
and the registration process must be repeated.
6. After successful registration, (the screen displays SUCCESSFUL).

Remove Handset (De-registration)

To de-register a handset from the base.
1. Press the menu/ok button.
. Press the 5 or 6 button to select REGISTRATION and press the menu/ok button.
3. Press the 5 or 6 button to select REMOVE HANDSET and press the menu/ok
button, the screen displays ENTER PIN (default setting = 0000).
NOTE: If an incorrect PIN code is entered, handset screen displays
WRONG PIN.
4. Input the correct PIN code and press the menu/ok button.
5. Press the 5 or 6 button to select the cordless handset (1,,3,4) to remove and
press the menu/ok button, the screen displays REMOVE HANDSET?.
6. Press the menu/ok button to conrm the setting.
7. Press the button to return to idle mode.
NOTE: The de-registered handset displays NOT REG. You must
register it again before using it.