10
Installing the Phone
Choose the best location to install your base and handset charge cradles. Your base
and handset charge cradle(s) should be placed on a level surface such as a desk or
table top, or you may mount the base on a wall.

Attaching the Desktop Pedestal

Using the upper set of slots on the bottom of the base; insert the tabs and then push
the pedestal down until it snaps into place.

Connecting the AC (Electrical) Power

1. On the base, plug the AC power adaptor cord into the power jack on the back of
the base and the other into an electrical outlet.
CAUTION: To reduce risk of personal injury, re, or damage use
only the 5-2823 (base) and 5-2824 (handset) power adaptors
listed in the user’s guide. These power adaptors are intended to
be correctly orientated in a vertical or oor mount position.
. On the handset charge cradle, plug the AC power adaptor cord into the power
jack on the back of the cradle and the other into an electrical outlet.
NOTE: The charge indicator on the handset charge cradle turns on
to indicate the handset battery is charging