GE A016-1CG manual Configuring the C3000/C0300 DPA A016RL Table, A016RL Table Fields

Chapter 11: Configuring the C3000/C0300 DPA A016_RL Table

This chapter describes entries the user must provide in the A016_RL table found in the C3000/C0300 DPA configuration.

The A016_RL table provides information for Raise/Lower control output points, which are used by the C3000/C0300 DPA. The table contains one record for each Raise/Lower control output point to customize the usage of the point. The fields contained in the table are described in the following table:

Table 12 A016_RL Table Fields

Field	Range	Description
Raise DO Point	Any valid system Digital	The system control output point number, which is used as the
	Output point or Undefined (-1).	destination for a Raise DO control point. The high entry limit is confined
		to the highest system control output point configured in the system.
		Entering Undefined (-1) disables Raising of the protocol point.
Raise Base	0 to 30000	This is the base duration, in milliseconds, used to operate for when a
Duration		Raise is requested for the protocol point corresponding to this record,
		via the formula:
		pulse duration = (inc. duration * mult.) + base duration
		where the inc. duration is also configurable and the mult. factor is
		specified in the master Raise/Lower request.
Raise Inc.	1 to 30000	This is the incremental duration, in milli-seconds, used to specify how
Duration		long the control output contact is to operate for when a Raise is
		requested for the protocol point corresponding to this record, via the
		formula:
		pulse duration = (inc. duration * mult.) + base duration
		where the base duration is also configurable and the mult. factor is
		specified in the master Raise/Lower request.

General A016-1CG-1.00-2

Full 21