•Supports RIMs and RRMs for a maximum of 172 fully configurable supervised
•Provides local and global alarm masking capabilities initiated from readers, keypads or operators.
•Full UPS battery backup included for controller, readers, REX devices, modems and door locks standard. Optional batteries required, see ordering information.
•Power Fault Detection: Internal for the detection and reporting to
the server of power fault conditions: loss of AC power and bat- tery voltage low when utilizing the UPS capability.
•Configurable local and global
•
15 ACU panels
•Optional
•
•Dual
•Optional high integrity
Local Database
The ACU’s local database is downloaded from the server to provide local access control processing even in the unlikely event that com- munication with the server is lost. The local database supports stor- age of up to 250,000 card records, including associated PIN, time schedule and door authorization parameters. When a cardholder presents a card to a reader, the ACU retrieves the card record from its local database to determine if the individual is authorized for entry at the associated door, and during that day and time. The ACU then activates the appropriate lock control relay if access is autho- rized. When the transaction is complete the access event is trans- mitted to the server for storage on disk. If communication is lost between the ACU unit and the server, the event is stored locally until communication is restored — after which all locally stored events will be uploaded to the server for storage on disk. A minimum of 10,000 event transactions can be stored in local memory. The actual number of transaction events that may be stored is dynami- cally allocated within the 16 MB of available memory, depending on the number of cardholders in the panel. The method of storing and uploading events also applies to alarms and other events.
Alarm Monitoring
All ACUs are provided with 12 supervised alarm inputs plus cabinet tamper detection, power fault and low battery alarms. The ACUs also contain 12 auxiliary output relays which can be locally or glob- ally linked to single or multiple alarm inputs with conditional activa- tion. Relay linking and activation parameters, as well as reader, remote control and time commands, are also downloaded from the server and stored in local memory, thus allowing local time com- mand processing to continue in the unlikely event that communica- tion to the server is lost.
Communication Options
The ACUXL16 is equipped with an onboard LAN port for communi- cation over a standard 10
The ACUXL16 also supports direct
ACUs are available with full