Opemting Your Air Conditioner Controb(continued)
For normal cooling
1.Set the Selector Switch at HIGH COOL.
2.Set the Thermostat Control at the desired number (usually
3.Set the Energy Saver Switch* at NORMAL position for continuous fan operation or at SAVE position to automatically cycle the fan on and off with the compressor.
4.Set the Ventilation Control at CLOSED except for brief periods when you want to exhaust room air to the outside.
For maximum cooling
1.Set the Selector Switch at HIGH COOL.
2.Turn the Thermostat Control to 10.
3.Set the Ventilation Control at
CLOSED.
4.Set the Energy Saver Switch* at the NORMAL position.
For quieter operation
1.Set the Selector Switch at LOW COOL position.
2.Turn the Thermostat Control to the desired number.
When the Thermostat Control is set on 9 or 10 and the Fan is set on low speed, moisture may freeze on the coils and prevent the unit from cooling. If this happens, set the Fan at high speed and set the Thermostat Control to a lower number.
3.Set the Ventilation Control at
CLOSED.
4.Set the Energy Saver Switch* at the NORMAL position.
Note: When the Energy Saver Switch* is at the SAVE position, changes in the sound level may be more noticeable than when it’s at the NORMAL position.
For nighttime operation
During the cooler evening hours, we recommend that you set the Selector Switch at LOW COOL for very quiet operation and the Thermostat Control at
To adjust air direction
Up and down
Y | |
AIR DIRECTION |
|
Three separate banks of
Side to side
OFFON
m
CIRCUWIRE
Some models have a Circulaire Switch. For fixed
For extreme temperatures
For greatest economy and best performance, we suggest you set the Selector Switch at HIGH COOL in extremely hot weather.
*On models so equipped
For continuous
Other models have two separate banks of
4