Remove the Air Conditioner From the Case
3 | A | Remove the 2 shipping screws from the back of |
the case. | ||
| B | Remove the 2 screws on each side of the case. |
|
| Keep these for later use. |
|
| Shipping screws |
C
Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.
Safety Instructions Operating Instructions
Prepare the Window and the Case
4 |
| Cut the window sash seal to the proper length. |
| Remove the backing from the top mounting | |
A | C | ||||
Peel off the backing and attach the seal to the | rail seal strip and attach it to the bottom of the | ||||
|
| ||||
|
| underside of the window sash. |
| top mounting rail. |
Installation Instructions
BCarefully insert the plastic frame guides into the bottom of the case on each side.
Bottom of case
D
Install the top mounting rail with 3 type A screws on the inside of the case. Insert the frames for the accordion panels into the top mounting rail and the frame guides. Attach the accordion panels to the side of the case using 4 type A screws on each side.
Top mounting rail
Troubleshooting Tips
Frame guide
Frame guides | 11 |
Customer Service
