Instructions
About the controls on the air conditioner.
Features and appearance may vary.
Operating Instructions Safety
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Cool on
Energy |
|
|
COOL |
| |
saver on |
| |
| ENERGY |
|
|
| |
| SAVER |
|
| FAN |
|
Fan on |
|
|
|
|
Timer on
TIMER 
TIME
FAN
SPEED
POWER
TEMP/TIME
FAN SPEED
TIMER MODE
Instructions
Air Conditioner ControlsRemote Control
Controls
| ON/OFF Pad | TIMER Pad | |
Turns air conditioner on and off. | ||
| TEMP/TIME Increase ▲ /Decrease ▼ Pads | it can be set to automatically come on in | |
1 to 24 hours at its previous setting. Each | ||
Use to set temperature when in COOL mode | ||
touch of the Increase ▲ /Decrease ▼ pads | ||
or the time when using the TIMER feature. | ||
will set the timer in hours. | ||
|
Use to set the air conditioner to COOL, ENERGY SAVER or FAN mode.
FAN SPEED PadUse to set the fan speed to LOW (F1),
MED (F2) or HIGH (F3).1 to 24 hours. Each touch of the Increase ▲ / Decrease ▼ pads will set the timer in hours.
To cancel the timer, press the TIMER pad until the display time disappears.
Display
Shows the set temperature or time remaining on timer.
Power Outage Recovery FeatureIn the case of a power outage or interruption, the | feature was set, it will resume its countdown. |
unit will automatically | You may need to set a new time if desired. |
used after the power is restored. If the TIMER |
|
■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.
■The remote control signal has a range of up to 21 feet.
■Make sure nothing is between the air conditioner and the remote control that could block the signal.
■Make sure batteries are fresh and installed correctly as indicated on the remote control.
4
