Care and cleaning of the air conditioner.
Air Filter
The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.
Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.
CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.
To remove (on some models):
Grasp the tab and gently pull the filter up and out.
To remove (on some models):
Open the inlet grille downward by pulling out the upper corners of the inlet grille.
Using the tab, push down on the filter to release it and pull it out.
Filter
tab
Grasp | Grasp |
corner | corner |
Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions
Outdoor Coils
The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally
steam cleaned, a service available through your GE service outlet.
Front Grille and Case
Turn the air conditioner off and remove the plug from the wall outlet before cleaning.
To clean, use water and a mild detergent. Do not use bleach or abrasives.
Consumer Support
Normal Operating Sounds
■You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency.
■You may hear the thermostat click when the compressor cycles on and off.
■Water will collect in the base pan during
high humidity or on rainy days. The water may overflow and drip from the outdoor side of the unit.
■The fan may run even when the compressor does not.
8
