About the controls and features of the dehumidifier.
Safety Instructions
CURRENT
HUMIDITY
WATER FULL
DEHUMIDIFY
OFF
FUNCTION
Controls
Instructions
WATER FULL Indicator
Blinks when the bucket is full or not in place.
DEHUMIDIFY Indicator
Lights when the compressor (dehumidifying function) is on.
FUNCTION
When you first plug in the dehumidifier, it goes through a
Operating
CURRENT HUMIDITY Display | The dehumidifier runs when the humidity | |
Shows the ambient humidity. The range | in the room exceeds 70%. The compressor | |
stops but the fan will run when the humidity | ||
displayed is | ||
is below 60%. | ||
below 39%, it will still show 39. | ||
|
Tips
Auto Defrost Feature
When frost builds up on the cooling coils, the compressor will cycle off until the frost disappears. The fan continues to run.
Same as above, but at 60% and 50%.
CONTINUOUS RUN
Continuously dehumidifies until bucket is full or humidity is below 35%.
Troubleshooting
CLEAN AIR (FAN ONLY)
The compressor is off, but the fan runs.
Choosing a Location
■The dehumidifier must be operated in an enclosed area to be most effective.
■Close all doors, windows and other outside openings to the room.
Place the dehumidifier in a location that does not restrict air flow into the rear coil or out the front grille.
A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area.
Customer Service
Air Direction
Make sure the louvers are open before starting the unit.
The louvers can be adjusted to blow air upward or
straight out. | Louvers |
|
It is normal for the surrounding air to become slightly warmer as the dehumidifier operates. This warming effect further reduces the relative humidity of the surrounding air.
4
