Operating Instructions SafetyInstructions
About the controls on the dehumidifier.
D | HUMIDITY | |
CONTROL | ||
R | ||
Y |
| |
E |
| |
R |
|
BUCKET FULL
FAN
SPEED
OFFCONTINUOUSControls
Care and Cleaning
The fan control adjusts the fan speed.
Set the fan control to HIGH for maximum moisture removal. When the humidity has been reduced and quiet operation is preferred, set the fan control to LOW.
When you first use the dehumidifier, turn the humidity control to 5 or 6. If you still have moisture, turn the humidity control to a higher setting.
CONTINUOUS is the highest setting.
When excess moisture and dampness odors are gone, adjust the control to a lower setting. Use the dehumidifier as long as excess moisture is present.
Consumer Support TroubleshootingTips
Other Features
BUCKET FULL Light
Glows when the bucket is ready to be emptied, or when the bucket is removed or not replaced in the proper position.
Auto Shut Off
The Water Level Control Switch shuts off the dehumidifier when the bucket is full, or when the bucket is removed or not replaced in the proper position.
Auto Defrost
When frost builds up on the cooling coils, the compressor will cycle off until the frost disappears. The fan continues to run.
4