Care and Cleaning OperatingInstructions Safety Instructions
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
SAFETY PRECAUTIONS
When using this dehumidifier, always follow basic safety precautions, including the following:
■ Use this appliance only for its intended | ■ Repair or replace immediately all electric | |
purpose as described in this Owner’s | service cords that have become frayed | |
Manual. | or otherwise damaged. Do not use a cord | |
■ This dehumidifier must be properly | that shows cracks or abrasion damage | |
along its length or at either the plug or | ||
installed and grounded as described | ||
connector end. | ||
in this manual before it is used. | ||
■ Turn the humidity control to OFF and | ||
■ Never operate this dehumidifier in an area | ||
unplug your dehumidifier before making | ||
that is likely to accumulate standing water. | ||
any repairs or cleaning. | ||
If this condition develops, for your safety | ||
NOTE: We strongly recommend that any | ||
disconnect the power supply before | ||
stepping into the water. | servicing be performed by a qualified | |
■ Never unplug your dehumidifier by pulling | individual. | |
■ For your safety, do not store or use | ||
on the power cord. Always grip plug firmly | ||
and pull straight out from the receptacle. | combustible materials, gasoline or other | |
| flammable vapors or liquids in the vicinity | |
| of this or any other appliance. |
HOW TO CONNECT ELECTRICITY
Consumer Support TroubleshootingTips
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Where a
it is your personal responsibility and obligation to have it replaced with a properly grounded
The dehumidifier should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
2