GE AHM18 4PREPARE THE CASE, 5INSTALL OUTER CASE IN WINDOW, 5PREPARE WINDOW FOR INSTALLATION

Installation Instructions

4PREPARE THE CASE

NOTE: Attach curtains to the air conditioner before placing the air conditioner in the window.

AInstall top mounting rail with four type A screws.

BSlide left-hand curtain assembly into left end of top and bottom mounting rail. Repeat for right hand curtain assembly.

CFasten curtain retainer strips to the sides of the outer case with four type A screws on each side.

C

D

5PREPARE WINDOW FOR INSTALLATION

AMeasure the width of the window opening. B Mark the center line on the inside windowsill.

A

B

A. Width of window opening

B. Center line

5INSTALL OUTER CASE IN WINDOW

APlace outer case in window. Lower sash until it rests behind front flange of top mounting rail. Bottom mounting rail must rest behind window sill.

Top rail

Window sash

About

5˚

SILL Bottom rail

BExpand the curtain panels to fill the window. Secure with type C wood screw in top and bottom corners. If needed, use drill and 1/8” bit to drill pilot holes for the screws.

CUse three type C screws to secure the case to the window sill. Drill pilot holes if necessary.

10