Installation Instructions

1WINDOW REQUIREMENTS

‡These instructions are for a standard double-hung ZLQGRZ<RXZLOOQHHGWRPRGLI\WKHPIRURWKHUW\SHV of windows.

‡The air conditioner can be installed without the side curtain panels if needed to fit in a narrow window. See the window opening dimensions.

‡All supporting parts must be secured to firm wood, masonry or metal.

‡The electrical outlet must be within reach of the power cord.

‡Follow the dimensions in the table and illustration for your model.

Models

A

B

AHM18DP

17 13/8σmin.

28 3/8σ– 38σ

 

 

 

 

 

A

B

(With side curtain panels)

2STORM WINDOW REQUIREMENTS

A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.

To adjust for this, attach a piece of wood to the sill.

WOOD PIECES

WIDTH: 2σ

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2σ higher than the top of the storm window frame or the vinyl frame.

Attach securely with nails or screws provided by the installer.

 

1/2σhigher

 

than vinyl frame

 

(on some windows)

1/2σhigher

Wood

 

than storm

 

window

Sill

frame

 

Storm window

Vinyl frame

frame

 

9

3PREPARE THE AIR CONDITIONER

ARemove three screws on each side of the case. Save the screws for use later.

BInsert a flat head screw driver between the front grille and the metal case along the sides. Gently pry the grille from the case. NOTE: Cover the flat head screw driver with tape to prevent scratching the case.

CUsing the handle on the bottom front of the air conditioner, pull the air conditioner out of the case. The air conditioner is very heavy so make sure that it will be resting on a sturdy surface.

Page 9
Image 9
GE AHM18 operating instructions Storm Window Requirements, Prepare the AIR Conditioner

AHM18 specifications

The GE AHM18 is a cutting-edge helicopter model developed by General Electric, designed to meet the sophisticated demands of modern aviation. This aircraft stands out for its exceptional performance, advanced technology, and remarkable versatility, making it an ideal choice for a variety of missions, including search and rescue, medical evacuation, and law enforcement.

One of the main features of the AHM18 is its powerful engine configuration. The helicopter is equipped with two high-performance turboshaft engines that provide impressive horsepower and allow for rapid acceleration and swift climbs. This dual-engine setup not only enhances safety through redundancy but also contributes to improved fuel efficiency, enabling longer flight durations and extended operational range.

In terms of technology, the AHM18 incorporates state-of-the-art avionics that enhance pilot situational awareness and streamline operational efficiency. The cockpit is designed with a full glass-panel layout, featuring advanced displays that provide real-time data on navigation, weather conditions, and aircraft performance. This futuristic cockpit design minimizes pilot workload and improves decision-making capabilities during complex missions.

The AHM18 also boasts innovative rotor blade technology that significantly enhances its aerodynamics and performance. The composite blades are designed for greater lift while reducing drag, leading to improved fuel efficiency and flight stability. Additionally, the helicopter features an advanced fly-by-wire control system that offers precise handling characteristics, allowing pilots to maneuver the aircraft with ease in both urban and rugged environments.

Another remarkable aspect of the GE AHM18 is its modular design, which facilitates easy maintenance and upgrades. This feature ensures that operators can keep the helicopter at peak performance throughout its lifecycle, adapting to evolving operational needs with minimal downtime.

The spacious cabin of the AHM18 is designed for maximum comfort, accommodating a versatile range of configurations for passengers and cargo. The helicopter can be outfitted with medical equipment for air ambulance missions or modified for tactical operations, showcasing its adaptability.

In conclusion, the GE AHM18 is a formidable helicopter that brings together powerful performance, cutting-edge technology, and versatile design. Its combination of advanced avionics, innovative rotor blade technology, and modularity makes it a top choice for operators seeking a reliable and efficient aircraft capable of handling diverse missions with ease.