Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

When using this dehumidifier, always follow basic safety precautions, including the following:

Tips Care and Cleaning Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This dehumidifier must be properly installed and grounded as described in this manual before it is used.

■Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your safety disconnect the power supply before stepping into the water.

■Never unplug your dehumidifier by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

■Turn the dehumidifier OFF and unplug it before cleaning.

■GE does not support any servicing of

the dehumidifier. We strongly recommend that you do not attempt to service the dehumidifier yourself.

■For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

■Do not use outdoors.

■This dehumidifier is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The dehumidifier should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

2

Page 1 Page 3
Page 2
Image 2
GE AHM30, AHM40, AHM65* Safety Precautions, HOW to Connect Electricity, Do not use an adapter plug with this appliance
Page 1 Page 3

AHM30, AHM65*, AHM40 specifications

The GE AHM series consists of advanced hybrid propulsion systems designed for a variety of aircraft applications. The AHM30, AHM40, and AHM65 models feature cutting-edge technologies that enhance performance, efficiency, and reliability in demanding aviation environments.

The GE AHM30 model is tailored for smaller regional aircraft and offers a compact footprint while delivering impressive power output. With a maximum thrust capability of approximately 3,000 pounds, the AHM30 is equipped with an efficient turbofan engine that utilizes advanced materials to reduce weight and increase durability. The hybrid architecture of the AHM30 allows for seamless transitions between electric and traditional fuel sources, resulting in lower fuel consumption and emissions.

Moving up the range, the GE AHM40 model is designed for medium-sized commercial jets and offers a balance of power and efficiency. This model boasts a thrust range from 5,000 to 7,000 pounds, making it suitable for longer regional routes and short-haul international flights. The AHM40 incorporates next-generation noise reduction technologies, ensuring compliance with stringent environmental regulations while providing a quieter cabin experience for passengers. Enhanced avionics and control systems also significantly improve flight safety and operational flexibility.

The most powerful in the series, the GE AHM65, is engineered for larger aircraft and boasts a thrust output of up to 10,000 pounds. This model is particularly effective for operations in high-demand environments, such as cargo transport and military applications. The AHM65’s hybrid propulsion system features robust electrical systems that can power auxiliary devices, reducing the reliance on traditional fuel systems and paving the way for sustainable aviation practices. Additionally, the AHM65 offers superior thrust-to-weight ratios, enabling better climb performance and efficiency during all stages of flight.

All three models in the GE AHM series leverage advanced diagnostic and monitoring technologies, allowing operators to maximize uptime and minimize maintenance costs. With real-time data analytics, operators can track system performance, predict maintenance needs, and ensure optimal operation throughout the aircraft’s lifecycle.

In summary, the GE AHM30, AHM40, and AHM65 stand out in the aviation industry with their innovative hybrid technologies, fuel-efficient designs, and commitment to sustainability. Their impressive performance characteristics make them suitable for a wide range of applications, from regional air travel to heavier cargo and military missions, representing the future of efficient aviation propulsion systems.
Top Page Image Contents