GE AJCQ12DCC Frame Construction, Flexible Mounting Position, Brick Block and Brick or insulation

AJCQ12DCC

GE® ENERGY STAR® 230/208 Volt Built-in Room Air Conditioner

Dimensions (in inches)

Installation Information: A finished opening of 26-1/8" x 15-3/4" clear of intrusions is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.

Note: Units should be caulked on all four sides of case to the building exterior to assure building integrity.

Two Wall Cases for Tenant Option Installation

When the air conditioner is offered as a tenant option, these wall cases provide protection against outside elements.

RAB47 – includes wall case, exterior grille and steel closure panels.

Make frame if desired or caulk between case and siding

26-1/815-3/4

Lintel
OUTSIDE	16-7/8
Caulking
Drip Rail

Plaster Line

Trim Molding (if desired)

INSIDE

RAB48 – includes wall case, exterior grille, steel closure panel and two layers of insulation.

Standard Wall Case RAB46

Solid-sided wall case fabricated of galvanized steel with baked enamel finish. Welded areas are coated with

a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis. Provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Frame Construction	Flexible Mounting Position
Lintel
15-3/4
26-1/8

Fill open cells with mortar

Brick Block and Brick or insulation

Frame Construction

	Total volume and shelf	Listed by
	area are calculated by
		Underwriters
	the Association of Home
		Laboratories
	Appliance Manufacturers’
R	standards.

Specification Revised 3/07 390242