Instructions Safety Instructions

About the controls on the air conditioner—models with control knob(s).

Features and appearance may vary.

Controls (on models so equipped)

(Appearance will vary.)

Troubleshooting Tips Installation Instructions Operating

ON/OFF Switch

Turns air conditioner on and off.

NOTE: If the air conditioner is off and is then turned on while set in a Cool mode, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Fan Switch (on some models)

Use to set the fan speed to LO or HI.

Mode/Temp Control (on some models)

Use to set the air conditioner to the Fan Only or a Cool mode.

Fan Only Mode

Use Fan Only at HI or LO Fan to provide air circulation and filtering without cooling.

Cool Mode

Use a Cool setting with HI or LO Fan for cooling. Turn the knob clockwise, toward the larger blue area, for the indoor area to become cooler. Turn

Controls (on models so equipped)

the knob counterclockwise, toward the smaller blue area, for the indoor air to become warmer. The Mode/Temp control is used to maintain the room temperature. When set in a Cool mode, the compressor will cycle on and off to keep the room at the same level of comfort.

Cooling Descriptions

For Normal Cooling—Select a Cool mode with the Mode/Temp knob set at the midpoint.

For Maximum Cooling—Select a Cool mode with the Mode/Temp knob set toward the larger blue area.

For Quieter & Nighttime Cooling—Select a Cool mode with the Mode/Temp knob set toward the smaller blue area.

NOTE: If you move the Mode/Temp control knob from a Cool setting to the Fan Only setting, wait at least 3 minutes before switching back to a Cool setting.

Consumer Support

Mode Control

Hi Cool, Med Cool and Low Cool provide cooling with different fan speeds.

Low Fan or Hi Fan provides air circulation and filtering without cooling.

Thermostat Control

The thermostat control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. When you turn the knob to a higher number, the indoor air will become cooler. Turn

6the knob to a lower number and the indoor air will become warmer.

NOTE: If you move the switch from a cool setting to OFF or

to a fan setting, wait at least 3 minutes before switching back to a cool setting.

Cooling Descriptions

For Normal Cooling–Select Hi Cool or Med Cool with the thermostat control at midpoint.

For Maximum Cooling–Select Hi Cool with the thermostat control at the highest number available on your knob.

For Quieter & Nighttime Cooling–Select Low Cool with the thermostat control at midpoint.

Page 6
Image 6
GE ASM06* installation instructions Instructions Safety Instructions, Consumer Support

ASM06* specifications

The GE ASM06* is a sophisticated gas turbine engine designed and manufactured by General Electric, specifically tailored for aviation applications. This powerful engine is a result of advanced engineering and innovative technologies aimed at delivering superior performance, efficiency, and reliability.

One of the main features of the ASM06* is its robust design, which integrates state-of-the-art materials and manufacturing processes. Utilizing advanced composite materials in fan blades and complex cooling systems, the engine achieves a remarkable balance between weight and performance, which is crucial for maximizing fuel efficiency and minimizing operational costs.

The ASM06* incorporates a high bypass ratio, which enhances its thrust capabilities while reducing noise emissions. This is especially beneficial for commercial aviation, as it meets stringent environmental regulations while providing a comfortable flying experience. The fan configuration also plays a significant role in optimizing aerodynamic performance, leading to better fuel consumption compared to older models.

Another standout characteristic of the ASM06* is its advanced digital engine control system. This system allows for real-time monitoring and precise adjustments to engine parameters, ensuring optimal performance under various flying conditions. The use of innovative sensors and control algorithms provides significant reliability and enhances maintenance capabilities, enabling operators to monitor engine health and performance efficiently.

In terms of technology, the ASM06* features high-efficiency combustors designed to minimize nitrogen oxide (NOx) emissions. These advanced combustor technologies help the engine to operate with lower environmental impact while maintaining high power output. The use of additive manufacturing techniques has also been a game-changer in producing complex components that were previously difficult to fabricate, resulting in a reduction of weight and an increase in durability.

The modular design of the ASM06* facilitates easier maintenance and quicker turnaround times, which is vital for airlines looking to maximize aircraft availability. This capability not only reduces operational expenses but also enhances overall fleet performance.

In conclusion, the GE ASM06* represents a significant advancement in gas turbine technology, combining high performance, fuel efficiency, and lower emissions. Its innovative features and characteristics make it an attractive choice for airlines looking to improve their operational effectiveness while adhering to environmental standards. With its advanced design and technologies, the ASM06* will undoubtedly play a critical role in the future of aviation engines.