GE ASM08 Care and cleaning of the air conditioner, Consumer Support Troubleshooting, Air Filter

Models: ASM08 ASD06 ASM10

1 20
Download 20 pages 43.81 Kb
Page 8
Image 8
Care and cleaning of the air conditioner.

Care and cleaning of the air conditioner.

How to Insert the Batteries

 

Remove the battery cover by sliding it

1

according to the arrow direction.

 

 

Insert new batteries making sure that the (+)

2

and (–) of battery are installed correctly.

 

 

Reattach the cover by sliding it back

3

into position.

 

NOTES:

Use 2 “AAA” (1.5 volt) batteries. Do not use rechargeable batteries.

Remove the batteries from the remote control if the system is not going to be used for a long time.

Grille and Case

Turn the air conditioner off and remove the

To clean, use water and a mild detergent.

plug from the wall outlet before cleaning.

Do not use bleach or abrasives.

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your GE service outlet.

Tips Installation Instructions Operating Instructions Safety Instructions

Air Filter

The air filter behind the front grille should be

To remove (on some models):

checked and cleaned at least every 30 days or more

 

often if necessary.

 

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

To remove (on some models):

Grab the tabs on the filter and pull it up and out.

Consumer Support Troubleshooting

 

Open the inlet grille upward by pulling out the

 

1

To remove (on some models):

bottom of the inlet grille.

 

 

Using the tab, pull up slightly on the filter to

Grab the tab on the filter

2

release it and pull it down.

and pull it to the right.

 

8

Page 8
Image 8
GE ASM08, ASM10 Care and cleaning of the air conditioner, Consumer Support Troubleshooting, How to Insert the Batteries