Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Installation

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Page 2
Image 2
GE ASM08, ASM10, ASD06 operating instructions Safety Precautions, Instructions Operating Instructions
Page 1 Page 3

ASM08, ASD06, ASM10 specifications

The GE ASM10, ASD06, and ASM08 are notable members of General Electric's industrial automation and control lineup, specifically designed for advanced motion control and process automation applications. Each of these models offers unique features and technologies that cater to different operational needs while maintaining the high reliability and performance expected from GE products.

The GE ASM10 is recognized for its robust architecture and flexibility in various industrial environments. It supports a wide range of communication protocols including Ethernet, PROFINET, and Modbus, allowing for seamless integration into existing systems. With its streamlined design, the ASM10 maximizes space utilization and simplifies installation, making it an ideal choice for machinery manufacturers and system integrators. This series excels in providing high precision positioning capabilities, making it suitable for CNC machines, robotics, and other applications requiring fine motion control. Advanced safety features, such as Safe Torque Off (STO) and Safe Stop 1 (SS1), enhance operational safety, protecting both equipment and personnel.

The GE ASD06 offers a scalable solution targeted primarily at automation tasks. It integrates sophisticated algorithms for motor control, which result in energy-efficient operations while maintaining optimal performance. The ASD06’s user-friendly interface allows for easy configuration and monitoring, enhancing productivity for machine operators. Additionally, it features built-in diagnostics that provide real-time feedback on system performance, allowing for preemptive maintenance. This model supports various motor types including synchronous and asynchronous motors, making it versatile across different industries. Its compact design requires minimal mounting space, which is particularly beneficial for retrofitting existing machinery.

Finally, the GE ASM08 is designed for applications that require high-speed and high-accuracy performance. The controller employs cutting-edge motion control technologies that facilitate precise synchronization of multiple axes. Its ability to handle complex applications, such as multi-axis robotics and intricate conveyor systems, sets it apart as a leader in advanced automation. The ASM08 is equipped with powerful processing capabilities, supporting real-time data analysis and decision-making. Its modular design enables easy expansion of system capabilities, ensuring that organizations can adapt to changing production demands.

In summary, GE's ASM10, ASD06, and ASM08 series provide diverse, high-performance solutions that enhance operational efficiency across various sectors. Each model combines innovative technologies with user-friendly features, enabling industries to achieve greater productivity and safety in their automation processes.
Top Page Image Contents