Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
127⁄8″ min.
22″ to 36″
(With accordion panels)
1713⁄16″ min.
(Without accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
3PREPARE AIR CONDITIONER
ARemove the backing from the top mounting rail seal strip and attach it to the bottom of the top mounting rail.
BInstall the top mounting rail with 3 type A screws from the outside of the case.
Top mounting rail 
Bottom mounting rail 
CLoosen the lower screw on each side of the case and hook a security bracket on each side.Tighten the screws to secure the brackets in place.
Security bracket
Security bracket
1/2″ higher than frame
Storm window frame
Wood
Stool |
12
