GE AST10, ASV18, ASP24, ASP12, ASM12, ASM14, ASM16, ASP18, ASP14, ASM22 Install the Case in the Window

Install the Case in the Window

7		Carefully slide the case into the window and
	A
		center the case. Lower the window behind the
		top mounting rail. Mount the case to the

window sill using 6 type B screws.

6 Type B screws

BThread a type C bolt about 1/2 of the way into the outer face of the shortest angle of each V-support.

Type C bolt

CPosition the V-supports on the case bottom so that they will be near the outside wall. Attach a V-support to each side of the bottom of the case using type A screws, 4 on each side.

DAdjust the type C leveling bolts against the outside wall so that the case has a slight tilt to the outside. Use a level; about a 1/2 bubble will be the correct case slant to the outside.

NOTE: Use a wood block between the leveling bolts and the wall if the wall is weak or if the weight of the air conditioner falls between the studs in the wall.

EExtend the left and right accordion panels to the vertical window sashes and attach the top and bottom corners with 4 type B screws.

Top mounting rail

Type B

screwType B screw

Type B screw

Type B screw

13

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support