GE ASM24, ASW24, ASW18, ASV24, ASN24 Remove The Air Conditioner From The Case, Prepare The Case

Window Installation Instructions

3REMOVE THE FRONT GRILLE (IF ATTACHED) (cont.)

BPull the bottom grille

corners out to release the lower tabs on each side.

NOTE: Do not pull the bottom edge toward you more than 3″ or

you may damage the tabs of the grille.

CLift the grille up and off the top tabs.

4REMOVE THE AIR CONDITIONER FROM THE CASE

ARemove the 4 screws on each side of the case. Keep the 2 front-side screws for later use.

Front of air conditioner

BSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.

Front of air conditioner

Remove packing cardboard and tape, if present.

12

5PREPARE THE CASE

ARemove the backing from the top mounting rail seal strip and attach it to the bottom of the top mounting rail.

BInstall the top mounting rail with 5 type A screws from the outside of the case.

Top mounting rail

Bottom mounting rail

CInsert the frames for the accordion panels into the top and bottom mounting rails. Attach the accordion panels to the side of the case using 8 type A screws.

Top mounting rail

Accordion panel

Type A screws

BACK

Bottom mounting rail