Installation Instructions
B OUTSIDE BACK EXHAUST (Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Remove Exhaust Adaptor
B3. Attach Mounting Plate to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Microwave Oven
B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside exhaust.
•Read the instructions on the REAR WALL TEMPLATE.
•Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate.
•Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
B2. REMOVE EXHAUST ADAPTOR
This microwave oven is shipped assembled for top exhaust. You will need the exhaust adaptor for installation in the rear wall opening. To remove the exhaust adaptor from the microwave oven:
1Remove tape securing damper.
2 Remove and |
| 3 Lift off the | |
save screw |
| blower plate | |
that holds | Damper | and attached | |
blower plate | adaptor from | ||
| |||
to microwave. |
| the microwave. |
Back of
Microwave
4Slide exhaust adaptor to one side and remove it.
15