Installation Instructions
B5. ADAPTING MICROWAVE BLOWER FOR OUTSIDE BACK EXHAUST (cont.)
3Roll the blower unit 90° so that fan blade openings are facing the front of the microwave.
Before Rolling | After Rolling |
Back of | Back of | |
Microwave | ||
Microwave | ||
|
4Gently slip the wire through the gap between the two tabs on the top of the blower so the wire is behind the tabs.
Before Rerouting | After Rerouting |
5Rotate blower unit counterclockwise 180°.
Before Rotation | After Rotation |
Back of | Back of |
Microwave | Microwave |
6Place the blower unit back into the opening.
AFTER: Fan Blade
Openings Facing Back | End A |
| |
End B |
|
CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched.
NOTE: The blower unit exhaust openings should match exhaust openings on rear of microwave oven.
7Guide the wire down into the blower opening so it rests securely in front of the blower.
8Secure the blower unit to the microwave with the screw from Step 1.
Blower Plate
Back of
Microwave
Blower Motor
Screw
9Replace the blower plate in the same position as before with the screw.
10Attach the exhaust adaptor to the rear of the oven by sliding it into the guides at the top center of the back of the oven.
Adaptor
Back of
Microwave
Guide
Guide
17